OK-Vise® Economy Clamp
The cost efficient choice!
These models meet the demands of workholding when ultra precision and high clamping force are not necessary. They are made of the same raw material as our other models, and the bottom of the jaws are ground for precise positioning on the fixture base. AK2-VT-SO always comes with Viton o-rings.
Only the bottom of the jaw is ground. Only our two smallest series clamps are avaiilable in the economy model (AK2-VT-SO)
- Part Drawings
- Product Literature
Click the Part Number
in below chart
for Price and Stock Check.
for Price and Stock Check.
 CAD Download Link |
| Part Number | A Min | A Optimum | A Max | B | C | D | E | Socket Head Screw DIN 912 | Clamping Force of Jaws kN (lbs) | Tightening Torque Nm (ft/lbs) | Weight in g (lbs) approx. | Hardness of Jaws HRC | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 20 | 23 | 25 | 22 | 11 | 15 | 4.2 | M5x25 | 10 (2,248) | 10 (7.4) | 22 (0.05) | 48-52 | ||
| 27 | 29 | 31 | 29 | 15 | 21 | 2.5 | M8x20 | 15 (3,372) | 25 (18.4) | 55 (0.12) | 48-52 | ||
| 27 | 29 | 31 | 29 | 15 | 21 | 2.5 | M8x20 | 15 (3,372) | 25 (18.4) | 55 (0.12) | 48-52 |
Other Jergens Divisions:
Home |
About Us |
Order Status |
Literature |
Industry Solutions |
News & Events |
Contact Us |
Careers |
Privacy Policy |
Sitemap |
Terms of Use
